Run JupyterHub without root privileges using sudo#

Note: Setting up sudo permissions involves many pieces of system configuration. It is quite easy to get wrong and very difficult to debug. Only do this if you are very sure you must.

Overview#

There are many Authenticators and Spawners available for JupyterHub. Some, such as DockerSpawner or OAuthenticator, do not need any elevated permissions. This document describes how to get the full default behavior of JupyterHub while running notebook servers as real system users on a shared system, without running the Hub itself as root.

Since JupyterHub needs to spawn processes as other users, the simplest way is to run it as root, spawning user servers with setuid. But this isn’t especially safe, because you have a process running on the public web as root.

A more prudent way to run the server while preserving functionality is to create a dedicated user with sudo access restricted to launching and monitoring single-user servers.

Create a user#

To do this, first create a user that will run the Hub:

sudo useradd rhea

This user shouldn’t have a login shell or password (possible with -r).

Set up sudospawner#

Next, you will need sudospawner to enable monitoring the single-user servers with sudo:

sudo python3 -m pip install sudospawner

Now we have to configure sudo to allow the Hub user (rhea) to launch the sudospawner script on behalf of our hub users (here zoe and wash). We want to confine these permissions to only what we really need.

Edit /etc/sudoers#

To do this we add to /etc/sudoers (use visudo for safe editing of sudoers):

  • specify the list of users JUPYTER_USERS for whom rhea can spawn servers

  • set the command JUPYTER_CMD that rhea can execute on behalf of users

  • give rhea permission to run JUPYTER_CMD on behalf of JUPYTER_USERS without entering a password

For example:

# comma-separated list of users that can spawn single-user servers
# this should include all of your Hub users
Runas_Alias JUPYTER_USERS = rhea, zoe, wash

# the command(s) the Hub can run on behalf of the above users without needing a password
# the exact path may differ, depending on how sudospawner was installed
Cmnd_Alias JUPYTER_CMD = /usr/local/bin/sudospawner

# actually give the Hub user permission to run the above command on behalf
# of the above users without prompting for a password
rhea ALL=(JUPYTER_USERS) NOPASSWD:JUPYTER_CMD

It might be useful to modify secure_path to add commands in path. (Search for secure_path in the sudo docs

As an alternative to adding every user to the /etc/sudoers file, you can use a group in the last line above, instead of JUPYTER_USERS:

rhea ALL=(%jupyterhub) NOPASSWD:JUPYTER_CMD

If the jupyterhub group exists, there will be no need to edit /etc/sudoers again. A new user will gain access to the application when added to the group:

$ adduser -G jupyterhub newuser

Test sudo setup#

Test that the new user doesn’t need to enter a password to run the sudospawner command.

This should prompt for your password to switch to rhea, but not prompt for any password for the second switch. It should show some help output about logging options:

$ sudo -u rhea sudo -n -u $USER /usr/local/bin/sudospawner --help
Usage: /usr/local/bin/sudospawner [OPTIONS]

Options:

--help          show this help information
...

And this should fail:

$ sudo -u rhea sudo -n -u $USER echo 'fail'
sudo: a password is required

Enable PAM for non-root#

By default, PAM authentication is used by JupyterHub. To use PAM, the process may need to be able to read the shadow password database.

Shadow group (Linux)#

Note: On Fedora based distributions there is no clear way to configure the PAM database to allow sufficient access for authenticating with the target user’s password from JupyterHub. As a workaround we recommend use an alternative authentication method.

$ ls -l /etc/shadow
-rw-r-----  1 root shadow   2197 Jul 21 13:41 shadow

If there’s already a shadow group, you are set. If its permissions are more like:

    $ ls -l /etc/shadow
    -rw-------  1 root wheel   2197 Jul 21 13:41 shadow

Then you may want to add a shadow group, and make the shadow file group-readable:

$ sudo groupadd shadow
$ sudo chgrp shadow /etc/shadow
$ sudo chmod g+r /etc/shadow

We want our new user to be able to read the shadow passwords, so add it to the shadow group:

    $ sudo usermod -a -G shadow rhea

If you want jupyterhub to serve pages on a restricted port (such as port 80 for HTTP), then you will need to give node permission to do so:

sudo setcap 'cap_net_bind_service=+ep' /usr/bin/node

However, you may want to further understand the consequences of this. (Further reading)

You may also be interested in limiting the amount of CPU any process can use on your server. cpulimit is a useful tool that is available for many Linux distributions’ packaging system. This can be used to keep any user’s process from using too much CPU cycles. You can configure it accoring to these instructions.

Shadow group (FreeBSD)#

NOTE: This has not been tested on FreeBSD and may not work as expected on the FreeBSD platform. Do not use in production without verifying that it works properly!

$ ls -l /etc/spwd.db /etc/master.passwd
-rw-------  1 root  wheel   2516 Aug 22 13:35 /etc/master.passwd
-rw-------  1 root  wheel  40960 Aug 22 13:35 /etc/spwd.db

Add a shadow group if there isn’t one, and make the shadow file group-readable:

$ sudo pw group add shadow
$ sudo chgrp shadow /etc/spwd.db
$ sudo chmod g+r /etc/spwd.db
$ sudo chgrp shadow /etc/master.passwd
$ sudo chmod g+r /etc/master.passwd

We want our new user to be able to read the shadow passwords, so add it to the shadow group:

$ sudo pw user mod rhea -G shadow

Test that PAM works#

We can verify that PAM is working, with:

$ sudo -u rhea python3 -c "import pamela, getpass; print(pamela.authenticate('$USER', getpass.getpass()))"
Password: [enter your unix password]

Make a directory for JupyterHub#

JupyterHub stores its state in a database, so it needs write access to a directory. The simplest way to deal with this is to make a directory owned by your Hub user, and use that as the CWD when launching the server.

$ sudo mkdir /etc/jupyterhub
$ sudo chown rhea /etc/jupyterhub

Start jupyterhub#

Finally, start the server as our newly configured user, rhea:

$ cd /etc/jupyterhub
$ sudo -u rhea jupyterhub --JupyterHub.spawner_class=sudospawner.SudoSpawner

And try logging in.

Troubleshooting: SELinux#

If you still get a generic Permission denied PermissionError, it’s possible SELinux is blocking you. Here’s how you can make a module to resolve this. First, put this in a file named sudo_exec_selinux.te:

module sudo_exec_selinux 1.1;

require {
        type unconfined_t;
        type sudo_exec_t;
        class file { read entrypoint };
}

#============= unconfined_t ==============
allow unconfined_t sudo_exec_t:file entrypoint;

Then run all of these commands as root:

$ checkmodule -M -m -o sudo_exec_selinux.mod sudo_exec_selinux.te
$ semodule_package -o sudo_exec_selinux.pp -m sudo_exec_selinux.mod
$ semodule -i sudo_exec_selinux.pp

Troubleshooting: PAM session errors#

If the PAM authentication doesn’t work and you see errors for login:session-auth, or similar, consider updating to a more recent version of jupyterhub and disabling the opening of PAM sessions with c.PAMAuthenticator.open_sessions=False.